Strategies For Painting A Vehicle Yourself

  • by Lucas Mohammed
  • 2 Years ago
  • Comments Off

There’s lots of work which goes into painting a vehicle. However, with all the tv shows, for example Overhaulin’, West Coast Customs, and Powerblock, it seems to become much simpler than. In the following paragraphs, I provides you with a couple of strategies for painting a vehicle that can make it simpler for you personally, however it still requires effort from you.

First, you have to understand that this kind of jobs are not for everybody. Actually, I’ve students that sign up for my auto body class which are surprised to understand the quantity of effort it requires to correct and paint a vehicle. I’ve viewed several YouTube videos where someone is demonstrating how produce results using Rustoleum along with a paint brush. Well, maybe that method is useful for a farm truck or tractor… that won’t work within the real life. It will take time and effort to get this done properly greater than one or two hrs without a doubt.

With this stated, for that other gear heads available, much like me, your time and effort isn’t painful. If you value this kind of work, your time and effort is fun and will get to your bloodstream. So if this isn’t a spare time activity you like doing, you might want to find another thing that’s.

Painting A Vehicle

The very first factor you need to bear in mind when painting a vehicle would be to clean the automobile. With time, the vehicle collects contamination in the atmosphere and waxing. These contaminates may cause lots of trouble for us within the refinish world. Contaminates for example silicone and oil is on top of the painter’s bad list. Many occasions the issue could be eliminated by a classic fashion hands wash will have the desired effect. Remember, since wax and silicone are our opponents, avoid using a vehicle soap with wax inside it. You want to strip the wax, not safeguard and increase it. Dish soap may also work if it doesn’t have added ingredients to keep your hands soft. Once washed, wipe the vehicle lower with wax and grease remover to make sure all traces of contamination are from the paint surface.

What Condition May Be The Paint In

If you’re lucky you are able to sand and paint the colored surface. However, there’s a couple of reasons which will result in additional work. When the surface is peeling, you will have to strip the paint off and begin again. If it’s only the obvious coat peeling, you might get by with only sanding all the obvious coat off and beginning the paint process after that. Another factor to bear in mind is when thick the paint is. When the coatings are gone 12 mils thick, you will have to strip a few of the coatings off, so you don’t keep accumulating the mil thickness. Ask the paint store in which you purchase your paint to check on it for you personally. They ought to possess a mil thickness gauge. When the vehicle is really a factory splash of paint, or maybe it doesn’t have any paint problems, you’re safe to prep and paint.

Sand and Paint

To color a vehicle, I will provide you with a wet sanding method, when you are most likely a do it yourself vehicle enthusiast without every tool on the planet. To get this done you just need some 400 grit dry or wet sandpaper, a squirt bottle water and a few elbow action. Sand the whole surface you’re painting with 400 grit sandpaper. Be sure to sand edges very well, because this is where paint will peel otherwise sanded correctly. When the entire vehicle is sanded, wash the vehicle again to make sure it’s totally clean. Let it air dry or use compressed air to hurry in the process, and you are prepared for paint.

Spraying Primer Sealer, Base Coat and Obvious Coat

If you didn’t inflict body work and there’s no bare metal, you don’t have to make use of primer sealer. However, should there be spots in which you sanded through departing the vehicle surface different colors, I’d make use of a coat of primer sealer to obtain a uniform color before spraying base coat. If you’re able to any bare metal, I’d hit it with self-etch primer inside a rattle can before painting too. Oh, not to mention, be sure to mask before spraying! Now you are prepared to spray base coat and obvious coat.

  • facebook
  • googleplus
  • twitter
  • linkedin
  • linkedin
Previous «
Next »